The dryer kept tripping the breaker. Now runs but I Have NO HEAT.
Answer Hello Nick,
You either have a bad heating element Y503978 or the power cord has failed at the terminal block.
I replaced the Heating element and the Thermal fuse kit but I'm not getting any heat. Help
Answer Hello John. You need to unplug the heater and test for voltage to each wire and then see where your losing the 120 volts at. Either the timer or the motor. Make sure there 240 volts at the terminal block first. You can test these with a multi-meter TJMA-DM1. They should read closed for continuity. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html