24/7 Customer Support

CHECKOUT
Items in Cart:
Total
$0.00

Customer Questions and Answers for Drain Pump Motor Assembly by Bosch

    • Part Number: AP2802385
    • MFG Part Number: 167082
    • Made by: Bosch
    • Not Available

Questions & Answers

For Bosch Drain Pump Motor Assembly (Part Number: AP2802385)

Ask a Question

Most Interesting  |  Latest Questions

My Bosch SHU43C05UC/17 dishwasher does not do a final drain. I have tried various cycles, I have noticed that it drains properly mid cycle then fills with fresh water, but the final drain never happens. I have tried the drain/cancel/power then drain/cancel buttons but no luck. Water remains in the bottom, almost to the top of the center filter. I get a "21" message when the drain/cancel/power is pressed. What parts should I consider?

Bman for Model Number Bosch SHU43C05UC/17

Answer

Was this helpful?

1 Answer

Drain pump (part number AP2802385) is not available. It says if the original drain pump has 9 or 4 impeller vanes order 642239 and 623143. My drain pump, like the one pictured has 6 impeller vanes. Is there replacement part(s) for mine? If so what number(s) should I order?

Don for Model Number SHU5305UC/U12 (FD8008)

Answer

Was this helpful?

1 Answer

I need to replace the Drain pump motor assembly but the Bosch part 167082 is Not Available. I tried the suggested replacement munbers on your site but both of the pumps come up not compatable with my model. Is there an alternative? Many thanks, Ross

Ross for Model Number SHU3302UC/06 FD 7905

Answer

Was this helpful?

1 Answer

Water is remaining in the dishwasher and I've checked the drain pump impeller for debris. There are no obstructions and the impeller spins freely. I also hear the drain pump motor activate but no water discharges. I don't hear the expected impeller noise, just a hum. The discharge line is clear and I've verified no blockages. Does this sound like a failed drain pump or are there additional items to check before ordering a replacement?

Al for Model Number shx46a05uc/14

Answer

Was this helpful?

1 Answer

Drain Pump Motor Assembly Part Number: AP2802385 MFG Part Number: 167082. Made by: Bosch. With the toe plate removed the pump motor vibrates and make a whining sound while draining. Other then the dreadful noise, the dishwasher operates fine. I'm 90% sure replacing the pump motor will remedy this issue. The original pump motor has 6 vanes. If I use the "appliance compatibility tool" on the page it states that the part isn't compatible with my model number. Just want to make sure if I order these parts that they will be compatible. 642239 and 623143. Any other gaskets or items that would be prudent to order with the pump motor? Thanks for your time.

Bill for Model Number shu43c06uc/17

Answer

Was this helpful?

1 Answer

I replaced the drain pump with with the recommended part (642239), and the pump is making a lot more noise than the original part. Seems to be draining well (if anything, more efficiently than the original part) but my wife is concerned about/annoyed by the increased noise. Any thoughts?

Headwaters for Model Number SHU9912 UC/U12

Answer

Was this helpful?

1 Answer

Hello! Our dishwasher wasnt draining, so my son and I disassembled it, only to find that a mouse had built a nest which tripped the safety switch inside, the red one that apparently detects water on the inside floor of the unit. In the process of our exploration, we took apart the drain motor to see how it works and make sure it was ok. . When I woke up today, the first thing I thought about was that it was likely a mistake to "clean" the rotating magnet inside. What I am sure we did was remove the lube. We tested the dishwasher and it works fine now. Draining perfectly What we need to do, though, is lube that motor. Any suggestions for lubricant?

Marji for Model Number Shu53 series

Answer

Was this helpful?

1 Answer

I'm replacing the pump in my Bosch, I had a 6 vane and through my dealer I now have a 9 vane. I don't know which tab I should put the grey which has two wires or the tab to put the white wire. The old pump had 4 tabs which only two were used.

Fred for Model Number shu43c06uc/17

Answer

Was this helpful?

1 Answer

Water will fill, but will not drain after cycle.

Gregory P for Model Number shu43c07uc/14

Answer

Was this helpful?

1 Answer

Hello, I am trying to replace the drain pump and am aware that this part is no longer available. My original drain pump has 6 impeller vans like is shown in the picture above. The description for the replacement part only mentions pumps with 4 or 9 vans. I ordered the pump with 4 along with the adapter (AP2806666 and AP5323611). Is this going to work on my model? Would it be better to go with the 9?

Jason for Model Number shx33A02UC

Answer

Was this helpful?

1 Answer

 

 
 
We are Safe, Secure, Dependable and Trusted
  • BizRate.com Customer Certified Site - Click to Verify