After dishwasher has finished washing ,water seep into bottom of washer.
Answer Hello Howard. You need to order and replace the water valve on the unit.
How do you remove the water inlet valve?
Answer Hi Norman. You will need a T-20 torx screwdriver to remove the toe kick panel. Remove insulation. Without disconnecting, move the sump hose away from the valve. Disconnect the wires(including the ground). Remove the T-20 screws holding the water valve. pull the valve out and disconnect the hose. Remove all the drained water from the base of the pan. Use Teflon tape and do not over tighten the water lines. The part # is 00092188. Thank you.