The lights in the upper oven do not turn off. The door switch works since the convection fan turns on when the door switch is depressed and turns off when the switch is release. If the problem is a control board relay which relay is it and can they be replaced or must the enire board be changed?
The relay would not be able to be replaced and you would have to get a complete control board. We would not be able to provide any further information due to the model number is not showing as valid. If you could double check your model and resubmit question we could assist further. Please post your model number with a new question on the parts page. http://www.appliancepartspros.com/modelnumber_locator.aspx
My kenmore Electric Range blow 2nd bulb,What`s the problem? How many volts is the bulb?
Answer Maverick, This is a "standard" appliance bulb. it is rated at 120 VAC 40 watts 5303013071. It has a "brass" base, to help reflect the high heat from the oven temperatures, but you still should apply a thin coat of dielectric grease to the threads to assist in keeping the base from seizing to the receptacle, and promote a better circuit, and make sure it is nor installed too tight. Good Luck and Thanks
How do I change the light bulb in the freezer.
Answer Hi Char. You will need to un clip the light diffuser. It may have a 1/4" scerw holdig it in place. You may need ti contort your body some to see all of this. The bulb part # is 5303013071. Thank you.