Hi. When the washer tub is at his right water level, we hear the click, but the water continues to fill the tub (at a reduce flow) and it never stops. Is it the Dispenser valve ?
Answer Hello Martial! You will either have a bad inlet valve 134190200 or pressure switch 134433701. If you can stop the water from entering the machine by turning off the timer or unplugging the unit, you will need to look for a bad pressure hose or replace the pressure switch. If the only way to shut off the water is at the shut off for the water hoses, you will need to replace the water valve in the unit. Thanks!
Hi, how can I test the dispenser valve? To verify it is bad
Answer Hello Joemech. Test for power coming to the solenoid. If there is power there, and no water, replace the valve assembly 131974700. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html