Customer Questions and Answers for Bearing by Frigidaire

Valerie for Model Number AEQ8000FE6

Answer Hello Valerie. You will need to order the front seal 134440200 and the rear bearing kit 5303281153 to repair the issues you are having. 

Lenny for Model Number fgx831fs1

Answer Hello Lenny. You need to check and make sure nothing is stuck in the blower wheel and binding the unit up. If not, and the drum turns by hand, you will need to replace the motor on the unit. 

Double D for Model Number defw1

Answer Hello Double, you might checked your belt 5303281154 and also see if the motor 5303201237 is working. Thanks! 

Alice for Model Number Kenmore 417.98702891

Answer Hello Alice. It sounds like the rear bearing and the front felt seal needs to be replaced on the dryer. 

Jon for Model Number FSE446RHS2

Answer Hello Jon. Based on the information you provided, you need to replace the rear bearing kit 5303281153 and the front felt seal 5303937182. 

Theresa for Model Number fer231as2

Answer Hello Theresa. You need to look at the rear bearing kit 5303281153, front glides 5303937182 and the idler pulley 131863007 all of which can cause the unit to make noise. 

Tom for Model Number GLER331AS2

Answer Hello Tom. If the belt is stretched, you will need to replace the belt 134503600. Hope this helps. 

Clark

Answer Hello Clark. If the bearing 131825900 is bad, the dryer will make noise and you will see alot of wear in the plastic bearing. You will need to remove the dryer drum to inspect the bearing. Hope this helps.