Hello, the video was helpful, and I replaced both boards. The right side is back to solid when the flapper is depressed, but when I look at the flapper side there's no light (from looking at other videos, it appears that side should be lit inside). I opened that side and reattached but still not working. Any suggestions?
Answer Hello Rich. Only one side lights up solid. Other side has no light. Make sure the freezer is between 0° and 5°. You need to check and see if there is power going to the water valve when the icemaker cycles. If so, replace the water valve on the unit. If not, or the icemaker does not cycle, you will need to replace the icemaker on the unit. Also, check and make sure the fill tube on the unit is not frozen and clogged. If so, replace the water valve and thaw out the fill tube. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
Is this the refrigerator door bins that fit on the top portion of the door or the bottom portion?
Answer Hello Kim! Door bin part number 240356402 is the top two refrigerator door bins used on your model FGHS2634KW0. Thanks!
will this fit on the top part of the door on this model?
Answer Hello Candy, according to the model number supplied this is the correct door bin that would hold a gallon of milk. Thanks!