How hard is it to replace compressor?
Answer Hello Bill. This is not an easy job. You have to braze the new compressor in making sure there is no restrictions or leaks. Then you will need an HVAC tech to check for leaks and recharge the system.
Does this model of refrigerator take freon?
Answer Hello Barbara. Yes, the refrigerator takes Freon.
When I cleaned rear of refrigerator are, should compressor feel hot when touched?
Answer Hello Pedro. Yes, the compress gets hot on the unit. This is normal operation.
Side by side fridge freezer combo freezer not freezing.
Answer Hello Jake. Check the condenser coils and make sure they are clean. Also, make sure the condenser fan motor is running good. If so, and the frost pattern in the freezer is not even, you will need to call an HVAC tech to repair the unit.
When I pull out capacitor and relay from compressor, I have 3 pins: one on the top, one on the bottom left and one on the bottom right. Which is R , S, and C
The pin that is top center is the common terminal, the pin on the bottom left will be the run winding and the pin on the right bottom will be the start winding.
What options do I have for replacement compressors for my refrigerator. Whirlpool price is outrageous just to replace the compressor.
This is a 2006 model.
Answer Tony, according to the model number supplied the replacement compressor is part number W10309994. You may click on the part number provided to view the parts information. Thanks!
What compressor part number will work on a Frigidaire (GLRS264ZA)?
Answer Hello Brett. 5304475102 is the correct compressor for the model number provided.
Friend gave me a used refrigerator, but warned me it was broken. I plugged in refrigerator and it was making a knocking noise. Took off the back panel and the knocking noise is coming from the compressor. Seems to be cooling, fan is working but knocking noise. It is a Kenmore, can you help me out? Do I need a compressor kit or compressor with starter kit?
Answer Hello James,
If the sound is coming from the compressor, it has an issue that will require a sealed system repair. This will require a compressor and a filter/drier. The part needed will be determined by the model number of the unit. This is located in the fresh food compartment on the units' I.D. tag, (usually on or near the ceiling of the unit).
What is the amperage of this compressor?
Answer Hello Eric. It looks to be 12.6 LRA.