Note: This question is for the older version of this part, but we thought you might still find it helpful
How can I replace part #AP2126395 in a frigidaire stove?
Guest
Answer Hello. You will need to disconnect the power to the range. Then remove the screws holding the broil element in place. Then pull the element out and disconnect the wires to the element. Reinstall in reverse order. Hope this helps.
1 person found this answer helpful.
Can you please email directions on how to change the brolier element? Thank you.
Gail for Model Number FEFL74ASG
Answer Hello Gail. Disconnect the power and open the oven door. Remove the racks from inside the oven and remove the screws holding the element braces to the top of the oven cavity. Then remove the screws at the back of the element and pull out the old element and unplug the wires going to the element. Install the new element 316199900 in reverse order into the oven.
Note: This question is for the older version of this part, but we thought you might still find it helpful
I was using my oven the other day and now it is not working
I notice that the elements do not work when I turn the oven on what happen?
Tammy for Model Number FEF352AWG
Answer Hello Tammy. Check and make sure there is 240 volts AC at the terminal block, and it is not burnt. If it is good, you will need to replace the control 316207511 if the element reads closed for continuity. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html