Why will my ice maker not quit making ice once the bin is full?
Answer Hello Jim. If the shut off arm is not stopping the icemaker, you will need to order and replace the icemaker on the unit.
My icemaker is stuck on crushing ice , it will not dispense cubes .....
Answer Hello Ken. You will need to replace the power board 241708102 and the control board 241708306. Make sure the solenoid is good in the freezer as well.
Icemaker is not working.
Answer Hello Dan. Make sure the freezer is between 0° and 5°. You need to check and see if there is power going to the water valve when the icemaker cycles. If so, replace the water valve on the unit. If not, or the icemaker does not cycle, you will need to replace the icemaker on the unit. Also, check and make sure the fill tube on the unit is not frozen and clogged. If so, replace the water valve and thaw out the fill tube. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
We are not happy with the very small ice cubes. Is there an option available?
There is not an adjustment to the icemaker for the water level. You will want to check the water pressure coming into the unit. Also check to make sure that the fill tube and fill cup on the icemaker are not frozen. If this is the case then the water valve would need to be replaced as it is seeping.
My icemaker is not making enough ice. Replaced the water valve and icemaker , don't know what to buy next.
The average icemaker will make 8 cubes of ice every 1 1/2 to 2 hours. A unit that is not making enough ice, you will want to look at other issue such as the temperature of the freezer compartment of the unit. If the temperature is not getting to at least 15 degrees there will be a long delay in the unit producing ice. The freezer is supposed to be 0 degrees for optimal temperature so you will want to check the temperature of the unit and look for other underlying issues that could cause the temp to not be cold enough. Examples, dirty condenser coils, condenser fan not running, or a possible defrost problem or the evaporator fan not turning fast enough.