The stove burners work fine but the oven wont light. I dont hear a click when turning it on, and there is no gas coming through Thanks Tom
Answer Tom, You won't hear a click, you'll have to remove the oven bottom and observe the oven igniter 316489402. Once you program a bake cycle, the igniter should start to glow, and in a matter of 30 to 60 seconds, it should be "white" hot, and the burner should ignite. If you can access a "Clamp ON" ammeter, the igniter needs to draw 3.2 to 3.6 amps on one of the wires in order to open the oven safety valve and igniter the burner.
Good afternoon, I am wondering does the ignitor control both settings bake and broil or does it have separate ignitors?
Answer Hello Zsanell. The model number you provided only has 1 igniter for both the broil and bake and there is also only 1 burner for both.
When I light my oven, I get a odor of gas. This goes away after a while, and my pans are covered in black stuff. What do I need to fix this? Thank You
Answer Hi. The oder smell is indicative of the safety valve diapram leaking and needing replaced. It is part # 3203459. (If you have not converted to LP gas), and then the valve does not regulate the gas then it will soot up as well by allowing too much gas. Thank You.
Top burners work fine. I set the oven and the circuit breaker trips
Answer Hello Rick. You need to check and look for a wire that is grounded and is causing the breaker to trip on the unit. Look for loose or cut wires causing the issues.