Ice maker wasn't making ice.... Noticed that water supply tube back of fridge (upper right) was no longer stuck in the hole to freezer so we put it back in hole (don't know how it came out?) and still no water through that tube to fridge? Any sggestions?
Answer Hello D. You need to check and see if there is power going to the water valve when the icemaker cycles. If so, replace the water valve on the unit. If not, or the icemaker does not cycle, you will need to replace the icemaker on the unit. Also, check and make sure the fill tube on the unit is not frozen and clogged. If so, replace the water valve and thaw out the fill tube. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
I need a lower drawer for my fridge with the stated model no. Is this part available on your site?
Answer Hello Mary. For the model number supplied the closest we were able to get was FRS26R4CB1. The lower crisper pan for this model number is part number 240351207. Thanks!
I need to replace the chilled meats drawer, I need the correct measurements to make sure its a fit.
Answer Hi Beth. Lower Storage Pan - Drawer front not included. For upper pan order5303289500. Part Number: 5303289501. Made by Frigidaire. From the top it appears 17-1/2 " deep x 18-1/2" wide in back. The front is 18" wide. Thank You.
How do you get the front part off of the old upper and lower storage containers?
Answer Hello Tatabug. There are some tabs that need to be released around the rails of the bin. Once released, the front cover slides off the storage pan 5303289501. Hope this helps.
I need to replace both lower storage pans for model FRS26ZRG is there more information required for correct pans?
Answer Hello Wayne! For the upper storage pan use part number 5303289500 and for the lower storage pan use part number 5303289501. These pans are used on all Frigidaire models that begin with FRS26ZRG*, no other information is needed. Thanks!
I need to order both the upper and lower storage pans for my fridge, how do I snap off the old front to install on to the new ones?
Answer Hello Rick. The bin has a groove that the old front will have to snap out off and then will slide up easily. You will have visually inspect the front inner part of the drawer to see if you can see how you will have to snap the front off. Thanks!