The filter went out, replaced it. How long before it should make ice. How do I see if it's clogged or broken?
Answer Hello Mona. 4 to 6 hours on the ice. If none is being made, remove the icemaker and see if the fill tube is clogged.
i have 5 lines coming from water silonoid two whites yellow blue and green only line connected is one white to filter others are cut loose need to know route for water.
the green line will go on the valve that goes to the icemaker which would be the green solenoid, The Blue will go to the solenoid that is blue, the yellow to the yellow and the other white to the one that does not have anything connected to it.
Hi how are you. I'm trying to get a water filter for a frigidaire 1998 double door, I can't see clear the model number would you be able to help me please...thank you
Without the model number we can not be 100% sure that this is the correct part number for the water filter but is the one that was most used for Frigidaire refrigerators at that time. The part number is WF1CB.
I changed the filter and I get no water to the door.
If you are getting no water to the door but you are getting water to the icemaker then you will want to check to make sure that the water line in the door is not frozen. You can do this by disconnecting the tube at the bottom of the door and see if water comes out when you push the water dispenser lever. If no water then check to make sure that the lever is making contact with the switch and is not broken. If this checks ok and there is no water then the water valve would be the cause for failure.
Our Frigidaire side by side water and ice dispenser quit working but, it still makes ice. Seems to be no power to the dispenser panel. Model # FRS22Z GH W6
You will want to check the wire harness at the top or bottom hinge of the freezer door for broken or loose wiring. If the wiring checks ok then you will want to test power to the board on the dispenser. If there is power then the board is faulty and would need to be replaced.