Have a burner that runs high regardless of dial setting. Need to know which part handles this part of the circuit.
Answer Hello Bill,
The most common cause of this complaint is a failed infinite switch. The part number will vary depending on the surface element that is not operating properly. The regular surface element infinite switches all cross to 5303935086. If it is the warming center infinite switch is part number 316095503.
to replace heating elements 15a and 15b please need direction so i could order both parts
Answer Nima, Here are the "basic instructions you requested. "Smooth top elements: 1. Disconnect power from the range. 2. Open the oven door and remove the two phillips screws holding the main top to the front frame and raise the main top. 3. Tag and disconnect wires from the element to be removed. 4. Remove the two screws, one on each end, of the element support bar. 5. The element is held to the support bar by 2 spring loaded clips. With a pair of needlenose pliers squeeze the tab on the spring mounting clip and push the element away from the bar. 6. The clips are held to the element by screws. When replacing the element be sure to note the hole number that the clip is attach to the old element." Thanks