I am installing the light interruptor switch part number 241547901. Which wires go to which prongs?
Answer Hello Cindy,
Without a valid model number, I cannot pull the wiring diagram, but if you go by the color codes on the switches terminals it will connect as follows:
Black goes to the outside terminal closest to the center terminal. Red with a blue trace goes on the center terminal and the yellow with a red trace goes on the far away outside terminal.
Of course, the best way to do this is either one wire at a time or write down which came off of which during dis-assembly. Taking a picture with your cell phone before removing the wires works great also.
WHAT BULB GOES IN LIGHT ON OFF IN DOOR OF ICE MAKING WATER UNIT
Answer Nancy, The dispenser light bulb/ lamp part number should be 5304421616. If we understand your question properly. Thanks and Good Luck
Light went out in the frig. changed the bulb. Changed the switch. I did notice that when I plugged in the new switch a fan came on but no light.
Answer Hi Jim. You Have an ADC control board mounted in the controls on the left side from front to back. On the E7 connection yel/blk wire is the output voltage to the light bulb circuit. You need to see if you have 120 vac between it and the E4 lt. blue wire connection. If you do not then you need to replace the part # 242011001. Thank You.
The lights work in the freezer side but not on the refrigerator side. And I can not find a switch for the lights on the refrigerator side. Is this a manufactures defect? If not can it be fixed? Thanks, Rich ps. The bulbs are good...
Answer Hi Rich. Even though the pictoral view only shows the light switch on the freezer side, it is the same common part used for both sides. Switch part # 241547901. It pops out with a putty knife and hooks up the exact way as removed. You can remove the power and jump the wires together to tell you momentarily if the rest of the circuit is good. Thank You.