It's a frigidaire brand washing machine, how do you install a new pressure switch on this model?
Answer Hello Tammy. We will need your correct model number to answer this for you. The one you provided is not working. Thanks.
1 person found this answer helpful.
My washer won't pump water out. I have disconnected pump and applied 110 A/C voltage directly to pump and the pump runs. With washer drum empty of water the washer still does not go to spin cycle. Does this indicate a that I have a defective timer switch?
You will want to check the unit when it is supposed to be draining on the timer terminal 9 to 12 and see if you are getting 120 vac at this point.
If you are not then the issue is the timer and would need to be replaced. If there is voltage at this point then you will want to check at the drain pump for 120 vac if there is not but power at the timer then you will need to check the wiring between the drain and the timer.
If pressure switch is bad, what will happen to the machine?
Answer Hello Paul. If the pressure switch 134680100 is bad, the machine can overfill, and also can run without water in it. If either one of these things are happening, you may need to replace the pressure switch. Hope this helps.
This is a frigidaire washing machine, need to no how to install a pressure switch & how much does it cost
Answer Hello Tammy! The pressure switch is part number 134680100. The price and stock information is included when you click on the blue link of the part number listed. You can visit our free repair forum and register for information on how to install this part. To register and post a question, use the following link, thanks!