After replacing it continue to over heat.
Answer Hello Otis. If the surface element is overheating, you will need to order and replace the switch for that element on the unit.
Will the universal kit work on my thermadore range?
Answer Hello John! We would not recommend using 5303935058 on your Thermador. You could however, try receptacle kit part number 12001676. Thanks.
I have used the universal receptacle kit, but the receptacle melts .
Answer Hello Hector. Based on the model number, 5303935058 is the correct receptacle kit for the unit.
The oven makes a buzzing noise at the control and rarely though occasionaly will start up. I replaced the igniter because aI found that voltage was reaching it though the voltage built slowly rather than immediate. Still the same. The thermostat seems to work. When working correctly oven makes a click noise when you press the bake button but now doesn't but soon starts a buzz.
Answer Hi Ken. If you are hearing the "Buzz" at the clock control area, then this part # is 318185337. It has relays on it that pass the voltage to the bake or broil element as the command is selected. The chattering is the relays defective. It will be a good time to double check the terminal block and make sure to remove the power. Make sure all is tight there so there is no voltage loss. Thank You.