Questions and Answers for GE WB44K10005 Bake Element

Total
$0.00

Our Price	$56.33
Compare At	~~$78.24~~
You Save	$21.91

Guest

Answer Hello. It sounds like you may have a bad thermostat. WB20K10026 Hope this helps.

1 person found this answer helpful.

Was this helpful?

Yes

Top of the stove and the broiler work perfectly. However, when I turn the oven on to 350 degrees, it only heats up to 250 degrees. If I turn it up to 400 degrees, it will only raise the temp about 20 degrees. I tried adjusting the thermometer up 35 degrees but their was no change in the temperature. What do I need to do.

Jim for Model Number RB 787WH1WW

Answer Jim, You will want to check for power going to the bake element. At the clock you will check from L1 to bake to make sure it has 240 vac. If not then you will need to trace wiring to look for open wire going to the bake element and back to the terminal block. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html

Was this helpful?

Yes

1 Answer

Looking for Broil Element. Broil Unit 3410. Serial No: FL268467P. Thank you for your help.

Marleny Perez for Model Number Model J B600W K1WW

Answer Mello Marleny, order broil element WB44K10002 for your model. Thanks!

Was this helpful?

Yes

1 Answer

What is the part number for a replacement heating element? Thanks.

Kathy S for Model Number GE Wall Oven -- J KP14WOT1WW

Answer Hello Kathy, for the bake element, order part# WB44K5013. Your broil element is part# WB44K5009. Thanks!

Was this helpful?

Yes

1 Answer

My GE oven bake element is fried. Literally, on Christmas one spot turned bright red, and after the turkey came out it snapped at a different point. The oven barely heats now. I need an element, but when I type in the model number, it says the element isn't compatible, but I go back and search again, it brings up the same element. I want an element that will work. Which one is right?

Bambi for Model Number Jbp2260p1ad

Answer Hello Bambi, The correct bake element for your unit is WB44X5082.

Was this helpful?

Yes

1 Answer

I have a stove that I inherited upon moving into my apartment 7 years ago. It is a GE Hotpoint - old model and the bake element has burn out on the bottom. I am trying to find another bake element to replace it with. The model numbert is listed as B7350 0J5AD. With the stove being so old, is there a bake element compatible for it that

Tanisha J for Model Number B73500J5AD

Answer Hello Tanisha. The model number you provided is not correct. It should start with a J. We will need your model number to help you with this. Please post your model number with a new question on the parts page. http://www.appliancepartspros.com/modelnumber_locator.aspx

Was this helpful?

Yes

1 Answer

Everytime I put this model no. it comes up as 1shsa or 2shsa or 3shsa or 4shsa. I dont have that on my paper. Is that the same to order or should I use the ge part no? It looks like my element.

Shirley B. for Model Number RB790ShSA

Answer Shirley, the model RB790SHSA is missing a digit and would not be located on paperwork but on the appliance itself on the model tag. However, all models use the same bake element. You will use part number WB44K10005. Thanks!

Was this helpful?

Yes

1 Answer

OVEN DOES NOT GO FROM PREHEAT TO BAKE BUT BROIL WORKS

Jeff for Model Number RB79OS

Answer Jeff, You're on the right track, You could have a bad bake element, but if you have a multimeter, you should check for 240 VAC across the two wires at the element in a bake cycle, that way you're sure the control bake relay is OK. Good Luck.

Was this helpful?

Yes

1 Answer

Customer Questions and Answers for Bake Element by GE

Bake Element

Questions & Answers

Most Interesting | Latest Questions