Customer Questions and Answers for Bearing Slide by GE

Note: This question is for the older version of this part, but we thought you might still find it helpful

Guest

Answer Roughly the greens one's go 11 o'clock and 1 o'clock and the whites go 9 o'clock and 3 o'clock. A link to our repair forum for a better idea. http://forum.appliancepartspros.com/dryer-repair/38865-ge-dryer-front-drum-bearing-slides-glides.html 

2 people found this answer helpful.

Note: This question is for the older version of this part, but we thought you might still find it helpful

George

Answer George, the drum slides come one per package. You will have to order two. For the white slides order WE1M504. For the green slides order WE1M1067. Thanks! 

1 person found this answer helpful.

Dawn for Model Number GE dryer elec, DBLR333EE2WW

Answer Dawn, You will want to check to make sure that the front bearing slides are not worn. If they are worn you will want to replace the bearing slides WE1M1067. 

Mike for Model Number DPSQ495ET0

Answer Hello Mike. You need 2 WE1M1067 and 2 WE1M504. 

Phil for Model Number nwsr483eb3ww

Answer Hello Phil, The difference is the composition of plastic. The green ones wear at a different rate than the white ones. The reason is determined by the engineers who will not disclose the exact reason. If you use all the same color, you will be back inside the unit before you want to be, changing them out again. They are the same sizes. 

Note: This question is for the older version of this part, but we thought you might still find it helpful

Bill for Model Number Dhdsr48gf3ww

Answer Bill, you will need two green glides WE1M1067 and two white glides WE1M504. You may add the parts to your cart to complete an online order, call in your order, or chat with online through our Live Chat. Thanks! 

Note: This question is for the older version of this part, but we thought you might still find it helpful

Buddy L for Model Number dbvh512efoww

Answer Hello Buddy, There is no type of adjustment for the glides. There is a pin that the glide sits over and with several revolutions of the drum around them they will lock into place where they will not move. 

Note: This question is for the older version of this part, but we thought you might still find it helpful

Jim S. for Model Number DCVH860GHOBB

Answer Hello Jim, The green go to the center and the white go to the two outside spots. 

Note: This question is for the older version of this part, but we thought you might still find it helpful

Brad Chalker for Model Number DS4500EA1WW

Answer Hi Brad, each model usually uses 2 White WE1M504 and 2 Green WE1M1067 glides and it's recommended that you change each of them. Hope this helps! 

Note: This question is for the older version of this part, but we thought you might still find it helpful

Tom for Model Number DBSR453EB3WW

Answer Hello Tom. You need two white WE1M504 and two green WE1M1067.