Is this the correct broiler element for my oven?
Answer Hello Warren, the correct broil element for your model number is part number WB44T10009. Thanks!
My replacement element back bracket does not have a hole for the screw to attach the thermostat. Can I just put the bracket for thermostat behind the bracket for the broiler element and use it to hold the thermostat?
Answer Hello Jon, You did not provide a valid model number for your oven so I'm not sure if you have an electronic oven control or a mechanical oven control. The broil element is simply mounted to the back of the oven using two screws. Just attach the wires and mount it. Regarding the "thermostat", are you talking about an oven senser or capillary tube? An oven sensor usually has a bracket that is used for mounting. A capillary tube usually mounts with a clip. You should NOT mount the capillary tube or oven sensor to the broil element bracket. If you can get back to us with a valid model number, we can likely help you further. Hope this helps!
Is this the right broil element for model # JBS55DOM1WW?
Answer Hello Mickey! Yes, the broil element WB44T10009 is the correct replacement. Thanks!
Is this the right broil element for JBP64WOH3WW?
Answer Hello Saleh! Yes, the broil element WB44T10009 is the correct replacement listed for your model number JBP64W0H3WW. Thanks!
How do I disconnect the wires and re install the new one. I have the back panel off and can see how it is connected.
Answer Pat, After you disconnect the wires from the element terminals, You'll need to opent or remove the oven door and racks, and remove the two(2) screws that hold the front element bracket to the roof of the oven and the screw that holds the rear bracket to the back wall, and slide the assembly out of the openings. Good Luck and Thanks
What is the wattage on this broiler element?
Answer Hello Stanley! The broil element WB44T10009 is a 3410W element. Thanks!