Shipping question - can you ship via fedex to Bermuda?
Answer Hello Derek. Unfortunately, we are unable to ship outside of the US or Puerto Rico at this time. We will need a US physical address to ship parts to.
Why is water leaking from the vents inside the refridge (bottom) and freezing? Its like the freezer is defrosting and leaking in the fridge.
Answer Hello Tonya,
The defrost drain is stopped up and the defrost water is leaking into the air vent system. The freezer compartment will have to be opened and the drain thawed out with a hair dryer. You should be extremely careful around the Styrofoam parts because if they break, air flow changes and items in the fresh food section will freeze. The defroat drain should be chased with a piece of weed eater line to ensure it is clear.
Freeze is good but refrigredair not cool .Then I check defrost heater and thermostar ,They are continuity . Please tell me What wrong in this refrigerator model Hotpoint HSS25GFTA WW
Answer Hao, Your refrigerator doesn't have a defrost timer. The defrost cycle is controlled through the main control board WR55X10942 on the back of the machine. If the freezer temperature is in range, and there's no frost or ice built up on the back wall of the freezer, then it's not likely a defrost issue. you most likely have a failed auto damper WR60X10215 that opens and allows cold air from the freezer to enter the refrigerator. if the thermistor or damper is faulty, the refrigerator compartment will get warm.
I have a french door refrigerator with a bottom freezer. The ice in the Ice Maker Bin melts into a solid mass each night. I can empty it out and it makes ice all day but by the next morning its again frozen into a block.
Based on the information it sounds like when the unit goes into a defrost it is sticking in the defrost cycle. You will want to check to make sure that the defrost thermistor is within range. The defrost theremistor resistance value should be 42.7K ohms at 0 degrees, 14.183K ohms at 37 degrees and 5K ohms at 77 degrees. If not within this range then you would need to replace the thermistor.