What is the weight of part number AP3191003? It is an evaporator fan motor for a GE refrigerator.
Answer Hello Phil! Unfortunately, we do not have the weight information available. We have a flat rate shipping available for our customers of $6.95 which takes approx. 2-5 business days to receive. Hope this helps you. Thanks.
On unit with serial # GM402947, does the evaporator fan come with the thermistor or without?
Answer Hello Chuck,
Part number WR60X10185 does not include the thermistor. Part number WR60X10074 comes with the thermistor. Part number WR23X10467 comes with the defrost thermostat, thermistor, and the evaporator fan motor and includes the connection for the light on the harness.
Hi I have this GE side by side and the evaporator fan is not working . I did replace it and I s still not working .I checked the power is getting 13 V . When is it supposed to turn on ? Or what else should I check? Thanks.
You will want to check the thermistors of your refrigerator. The resistance values should be as follows 42.2 Kohms at 0 degrees, 14.4 Kohms at 37 degrees and 10 Kohms at 77 degrees. If out of range then replace the thermistor. With a new fan motor if the control board is sending the voltage to the fan but the fan is not receiving voltage then it is a wiring issue inside the cabinet of the unit. If the motor is receiving voltage then it is a bad fan motor.
Hello, My refrigerator is From GE brand, and it's evaporator fan is not running from 3 days. So refrigerator is not working at all. What should I do now? Thank you.
You will want to check to make sure that you are getting voltage to the evaporator fan motor. If you are then you need to replace the evaporator fan motor.
How do I check if the defrost heater or the defrost thermostat
is no good? I do have a multimeter.
Answer Hello Dominick. It sounds like you may have a defrost problem with the unit. Check and see if there is any frost build up on the back wall of the freezer. If so, you will need to test the defrost heater and the defrost thermostat. They should read closed for continuity when cold. You can test this with a multi-meter TJMA-DMT3. I will include a link at the end to assist you how to use the multi-meter if needed. If both parts are good, you will need to replace the defrost timer. Once the problem is repaired, you will need to thaw out the ice on the coils before the unit will operate properly. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html