Is this fridge gasket only for the fridge or does it include the freezer door also?
The gasket WR24X446 is just for the refrigerator section and the freezer side would need to be ordered separately.
Will this replace the one on the fridge door?
Answer Jamey, according to the model number given the refrigerator door gasket part number WR24X446 is the correct replacement and will fit the refrigerator door section of your unit. Thanks!
What are the measurements for this part? I need to replace the whole seal around the door. Is this the part I need?
Answer Leslie, the door gasket part number WR24X446 measures approx. 29 3/4" X 39 3/4". According to your model number the correct replacement gasket is part number WR24X464. Thanks.
How is the gasket held on door ? I never changed one! The gagket looks in bad shape out of the box.
The door gasket on unit is held in by screws that hold a bracket that runs the length of door. You would loosen these screws and pull the old gasket out and slide the back of the new gasket behind braket. Once the gasket is behind the brackets you will tighten the screws. To get wrinkles out of the gasket. Soak in hot water and let it hang dry.
Will the freezer gasket listed fit this model? CTX21GISNRAD
Answer Hi Marco, order WR24X445 for the freezer gasket. If you also need the refrigerator gasket, order part# WR24X446. Hope this helps!
Do you get the metal strips and screws that hold the gasket in with the new gasket?
Answer Hello Ray! The refrigerator door gasket WR24X446 does not include the top retainer strip WR17X2237, side retainer strip WR17X2238, or the screws holding the gasket in place. You may use the existing parts. Thanks!
Is the door gasket self adhesive or do I need to get adhesive for it? Thanks
Answer Hello Shane. There is screws and metal strips under the gasket that holds the gasket WR24X446 in place, based on the model number you provided. Hope this helps.