Where can I get instructions for upper door gasket installation.
The model number listed is not coming up as a valid number. Based on the type of gasket, to replace it you would need to remove the door of the unit. Once door is removed you will remove 2 screws at the top of the oven liner and 2 at the bottom and pull the liner out slightly. Make sure that the power is off when doing this.
Is model #JBS03 054A the same as JBS03*05? Door gasket is WB2X1522? Is there a link for installation instructions for door gasket?
Answer Hello Randy,
You are correct. The door gasket is WB2X1522. The manufacturers' replacement instructions for replacement are: Standard Oven Gasket The gasket is located around the front lip of the oven liner. To change or adjust the gasket loosen the oven hook bolts and remove screw from center front top of oven liner. Pull liner forward and adjust or replace gasket, then tighten oven liner.
Might you have an upper oven door seal (rubber) for my oven and plugs as well (outlet)? Thank you
Answer Hello Oni,
We have the range receptacles in three prong TJMA-7673 and in four prong TJMA-1212. The model number will have to be verified on the units' I.D. tag since the one listed came up invalid. This will be necessary to look up and specific parts such as the one you requested. Thank you for your patience and understanding in this matter.
Need a new oven door gasket- can't find model in your listing. How do you replace it?
Answer Bill, I'm sorry, but we do not carry parts for or have information regarding a Camco model vj34pmw-3. Sorry about that!
I have a GE oven and the door gasket need replacing. Is there a replacement and what is the part number? Thanks.
Answer Hello Richard! The model number given is not pulling up in our systems as being valid. I see the ending of the e-mail address as being Canadian. If the model itself was purchased outside of the U.S. we would not have any information available. Sorry about that!