How do I get the ceramic cook top off to replace the element?
Answer Hello JC. DISCONNECT POWER, Pull Range 0ut
from wall and remove top back wire cover.
2. Remove 2 hinge arm brackets and
disconnect ground wire from cooktop. 3. Remove 2 screws from front edge of
4. Raise cooktop to 90” angle by carefully
rotating cooktop out from under control
NOTE; Place a protective coveting between
cooktop back and range body.
5. Remove hot light bracket and the two
element support brackets and carefully lay them
on top of oven liner and lift cooktop.
6. Reassemble in reverse order.
NOTE: Care must be taken not to scratch
underneath side of glass
Do you have the biggest of the burner parts for this model?
Answer Sergio, the largest right front element is part number WB30T10133. Thanks!
The broil element works fine and heats well but the bake element is not heating at all. Is this an element issue and if so what element would I need to purchase?
Answer Hello Jeelissa,
This can be a bad element WB44M168, a bad relay on the control assembly WB19M313, or a bad connection or wiring issue. I certainly hope the issue is in the wiring since both of the parts listed are no longer available and no satisfactory substitutions have been provided by the manufacturer. If the board is the issue, you can contact corecentricsolutions.com to see if they support the board. You will need to provide the part number for the board I listed and if they have you send it to them for repair, you need to take several pictures from different directions for your reference so you will have no problems re-wiring the timer to the unit. Also, if you carry the old element to a local appliance parts distributor, you may be able to match it up closely enough to a new element to replace it. This is kind of risky though since if the wattages are not identical, it can change the bake temperature enough to change the bake results.