Dry runs, but does not heat.
Answer Hello Debbie. Check and make sure you have 240 volts coming to the dryer. Check and make sure the unit is not set to Air Fluff. Also check the heater WE14X10015 and thermal fuses WE4X757 WE04X10094 and see if they are good. You can test these with a multi-meter TJMA-DM1. They should read closed for continuity. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
What causes dryer to quit heating midcycle?
Answer There are a few things that can cause this. First thing you need to check is your breaker. Make sure it is not getting hot and loosing one leg of 120volts. Hope this helps.
The whole assembly is not needed. (AP2043517) What is the part # for just the replacement element wire?
Answer There isn't a restring kit listed by the manufacturer for this single round heating element. There could be crosses out there, but we were unable to find a cross that was recommended by GE.