Auger is rusted, is it possible to replace the entire drawer with auger already assembled? I want to pull the old one out and put a new one in.
Answer Hello Jay. The part number for the complete bucket and auger assembly is part number WR17X4312. Hope this helps, and have a great day.
1 person found this answer helpful.
The auger slips on my icemaker dispenser but the icemakers works. What part or parts do I need for repair?
Answer Hello Dee. If the auger is slipping in the ice bucket, then this should fix your problem. Thanks.
1 person found this answer helpful.
The blades broke off in my ice bucket. I don't have any problems with the auger. Can I just buy the bucket? Thanks Duane W.
Answer Duane, Yes, The "Bucket" 2196091 / 2196091 is available as a separate component. We don't quite understand your post in concern to "The blades broke off in my ice bucket" there are probably more parts involved in the repair, depending on what blades you're discussing.
Hi, I have a new auger but can not assemble it, is there an assembly manual, cd, or online help to show me how to assemble the auger in the ice box.
There are no repair manuals, videos or instructions for the replacement of the auger on the ice bin. To change out the auger you will pull the ice bin out and empty it. Turn the bin over and remove the screw holding the lever on the underside of the bin. There should be an e-clip on the center of the front that you would need to remove along with the washer under it. Remove the screws holding the housing onto the front of the ice bin. Once you have the housing off you will need to remove the 2 bottom screws holding the metal plate to the ice bin. Lift out the auger assembly. The part that will be the trickiest will be the removal and replacement of the blades. When You remove the nut which is left threaded, you will want to pull each blade and spacer and keep them in order. You may want to mark them so that you remember the order they go back in. Once the blades are removed then you will remove the drum and start reassembly.
Does this part number AP2066344 (ice bucket + auger) work with model number TFX27fkc?
Answer Hello Gary! Yes, the ice bucket and auger assembly WR17X4312 is the correct replacement assembly and will fit your GE refrigerator model TFX27FKC. Thanks!
I need a complete ice dispenser bin and auger for the referenced refrigerator model. Which on is the right one for my refrigerator? Thanks.
Answer Hello Monty! Unfortunately, the manufacturer does not offer a complete ice bucket assembly for GE TBXW25FLR* models. All parts must be purchased separately and installed. Sorry about that!
What is the correct ice bucket and auger for this GE? Is It WR17X4312? Thanks!
Answer Hello Henry! Yes, the ice bucket and auger assembly WR17X4312 is the correct assembly used on your GE refrigerator model TFX25VRZBWW. Thanks!
The auger in my ice dispenser is rusted. It appears that part MFG WR17X4312 is what I need. My refrigerator displays 3 model numbers: TFX27ZP TFX25ZP TFX22ZP. I just want to confirm this is the correct one to order. Also, one of the door stops has broken and door falls open. Is the door stop easily replaced? It looks like a new one can be screwed on. Thanks for your help.
Answer Ronda, we will need the model number off the model/serial number tag plate located inside the side by side refrigerator. Models TFX27ZP is a 27 cu ft. unit, model TFX25ZP is a 25 cu ft. unit, and model TFX22ZP is a 22 cu ft. unit. The 25 and 27 cu ft unit uses the same ice bucket and auger assembly part number WR17X4312. The 22 cu ft uses a different ice bucket and auger assembly, part number WR17X4310. Thanks!