Water and light stopped working on water dispenser board. Light blinking on crushed ice. I changed dispenser board and the water filter. The ice maker does work. help. Do I need the new motherboard?
You will want to make sure that the dispenser is not locked. There is a button that has a lock symbol, make sure that the green light above it is not lit. If not then check the wire harness at the bottom of the door for damaged or loose connections. If this checks ok then you would want to replace the main control board.
The buttons in the interface faceplate(AP3203232) don't work, if I press the water, light, cube or crushed ice buttons, there is not a response to the commands, instead the indicators in the bracket & ov(AP3778023) turn off and seconds later turn on, then I took off the light bulb near to the faceplate and suddenly the water dispenser worked, not the ice dispensers.
Recently I have to replace the Ice Dispenser Solenoid (AP3963333) because was rusted.
So, I don't know if there is a problem with the Interface Disp Asm Wh ? Do I have to change it ?
Answer Hello JuanFer. Based on the informaion you provided, if some do work and others do not, you will need to order and replace the interface dispenser assembly WR55X10305 in the unit.
Ice Dispenser Solenoid.
Answer Juan, the solenoid is part number WR62X10055. Thanks!
I removed the bad interface control dispenser and reinstalled it. Now the fridge will not turn back on. All it does is click on and off. The panel between the door was hot.
Answer Hello Steve. Check all the connections on the interface assembly WR55X10305. If they are good, you will need to check and see where the clicking noise is coming from. You may have a bad main board assembly WR55X10942 on the unit. Hope this helps.