How do i remove the old handle. I can only see one screw on the inside of the microwave that removes the top of the handle.
Answer Hello Joe. You will probably need to disassemble the door to replace the handle. There should be an inner plastic panel seal. You will need to use a small screwdriver or butter knife to pry this off. Becareful and go slow not to break the tabs holding this in place. When removed you should see the screws for the handle. Hope this helps.
3 people found this answer helpful.
What is the door handle I need for this microwave number?
Answer April, the white microwave door handle list for your model is part number WB15X335. Thanks!
Which door handle fit and HOW do I replace it. It looks like something held bottom on but not from oven side. The top screw goes from inside. Don't see any screws holding door together... .On bottom of handle looks like something inside door with metal..Its still in door.
Answer Mr Mahan,
The door handle for your unit is part number WB15X335. To access the door in order to change out the handle you will use a flat blade like a putty knife and pop the inner door out. You will see 2 screws to remove to get the pieces out that were left and install the new handle.
I need a replacement door handle for GE Microwave/Convection Oven.
Answer Hello Bert. Here is a link to our Repair Forum, this is a free service to our customers. Use this link to access the repair for your question.
Want to verify that the handle for microwave shown here is the correct one for this model.
Answer Peter, the microwave door handle used on your unit is part number 05200273 and the trim is part number Y05200276. Unfortunately, these parts have been discontinued with no further replacements or cross references available and our company is unaware of any other available sources. Sorry about that!