The pump connector , part # AP3185201, has a hole in it and is sewing water. Can you tell me how difficult it is to replace and if someone with average handyman skills can do it?
Answer Hello Michael. These are not easy to do, but can be done. You will need to remove the motor to replace this part. Once removed, undo the clamp and pull the old connector off. Unscrew from the motor. Install the new connector and reinstall the motor.
Part 4556 at the bottom of my GE Potscruber 1380 is leaking. What do I need to do to change it?
Answer Hello Ankay. You will need to order the part that is leaking and replace that part. We will need your model number to help you more with this. Please post your model number with a new question on the parts page. http://www.appliancepartspros.com/modelnumber_locator.aspx
How do I remove the motor to replace part 455?
Answer Hello Chris,
To properly assist you we will need your model number to help you with this. Please post your model number with a new question on the parts page. http://www.appliancepartspros.com/modelnumber_locator.aspx
Where or what is the part that connects to the pump connector.
#450 on the diagram from the pump connector diagram
Answer Hello Paul,
Connecting to the bottom of the pump connector is the motor on the bottom and then there is the filter on top. Then you have the main conduit WD12X10057 which has part number 450 attached to it.