Hello - I can't seem to find GSD5120D03BB listed anywhere, so will these rollers work with that model?
Answer Hello Steve! Yes, the roller and stud assembly WD12X10327 will fit the upper rack of your model GSD5120D03BB. Thanks!
how on earth do you uncrimp the metal glide to remove the old roller that has broken from the part that clips to the rack? the new part (roller and clip together)don't allow me to replace the rack clip only, which is what has broken.
Answer Cindy, You'll need a small flat blade "pocket" screwdriver to release the locking tab on the plastic end cap WD12X10304 on the rail(s) and remove them by pulling them out of the end of the rail. You can then roll the rack out of the rails and replace the roller/stud assembly. You may need to screwdriver to "unclip" the stud from the rack, and a pair of pliers will be handy when you snap the new stud assembly to the rack.
Will these roller studs work on my dishwasher? Is this part I need to keep the top rack rolling properly? These attach to the sides, right? Do you also sell the water pump for a Maytag washer, model PAV2300AWW? Thanks. You can see all is falling apart here...
Answer Hello! Yes, the roller and stud assembly WD12X10327 is the correct replacement rollers for the upper rack of your GE Dishwasher model GSD4020Z05BB. For the Maytag washer model PAV2300AWW we will need the serial number to help determine the drain pump or inlet valve as there is a series change. Please obtain this information and repost for further assistance. Thanks!
I'm trying to find out if this 4-pack will work on my dishwasher? I can tell the stud is different from the one on my washer in that each stud has a clip that connects to the upper rack. Do you know if this will work, and if not, can you suggest an original OEM part for this dishwasher. Thanks for your time.
Answer Gerald,The WD12X10327 roller repair kit is for the upper rack, and contains four rollers and axles. The WD12X271 roller kit is for the lower rack front roller, and has one roller and axel. The WD12X10267 roller kit is for the lower rack rear rollers it also contains one roller and axle. The part numbers listed are the APP numbers for the OEM part, all APP parts are OEM parts. You may want to have a pair of needle nose pliers handy for properly seating and locking the clip onto the rail of the rack securely. Thanks
Will this work on my dishwasher?
Answer Norman, we will need your appliance model number to verify if this roller and stud assembly WD12X10327 will work on your product. Thanks!
The white side rollers on the silver glide rollers have been broken in between the roller and the white clamp that is connected to the top rack.
Answer Hi Tina. If you are referring to the upper rack, the upper roller kit is part # WD12X332. 1/ea. For your model # , There are 2 different styles depending on the type of the axle. Please review part # WD12X271, and part # WD12X10267 to chose between the 2. Thank You.