I need to replace the 8" element. How can I locate the part?
Answer AW, the 6" element is part number WB30X218 and the 8" element is part number WB30X219. Thanks!
I need all four surface coils for this unit. Which part numbers do I need?
Answer Joshua, the 6" surface element is part number WB30T10078 and the 8" surface element is part number WB30T10074. Thanks.
1974 serial # T736380D. Need correct 8" infinite switch number. Any wiring info available? Thanks, P. Cote
Answer Hello! The burner element switch for a regular two prong element is part number WB21X5243. If your model has a four prong element you'll use burner switch part number WB24X5011 however, this is no longer available. Unfortunately, we do not have the wiring information available. Thanks!
I have a very old Hotpoint electric range that needs new burners, drip pans and main oven heating element. The only numbers I can find: Catalog # 207RC 439G and Serial # JG40505. Can you help me?
Answer Hello Sandy! The 6" element is part number WB30X356, the 8" element is part number WB30X354, the 6" pan is part number WB32X10012 and the 8" pan is part number WB32X10013. Unfortunately, the 6" trim ring part number WB31X50 and 8" trim ring part number WB31X5007 has been discontinued and is no longer available. The right oven bake element part number is WB44X5043 and broil element is part number WB44X5045. The left oven bake element is part number WB44X196. The left oven broil element part number is WB44X5037, unfortunately, this item has also been discontinued. Thank you for your inquiry.
I need all four burners and trim rings due to the contacts are all burnt and makes a bad connection. I think measuring the burners are 2-7" and 2-9".I need to find them.
Answer Hello Craig! The 6" element is part number 5300161845. The 8" element part number 5300162753 has been discontinued and is no longer available. The 8" ring is part number 5300131987 and the 6" ring is part number 5300131986. Thanks!
THE LARGE RIGHT FRONT BURNER DOES NOT HEAT. IT HAS THE FEATURE WHERE YOU CAN SWITCH FROM 4-6-8 INCH HEATING. ALL THE OTHER BURNERS PLUG IN, THIS ONE IS HARD WIRED. WHAT DO I NEED.?
Answer David, If theres no visible damage to the element WB30X219 and when you raise the cooktop, if there are no visible damage to the wiring to the element, and the attachment screws are tight. you'll need to check or replace the burner selector switch WB24X5011 or the infinite control switch 4391989 If the selector switch is at fault, it is no longer available and will need to be "bypassed" for the element to operate as an 8" element.