Do you have instructions to replace top burner igniter part # GE WB13K10003?
Answer Hello Abby,
Remove the two screws from each of the burner heads so the cooktop can be raised. Remove the ignitor mounting clip and lift the ignitor out of the opening. Remove the ignitor wire and reverse procedure to install. NOTE: The ignitor mounting clip must be turned so the flat side of the clip is toward the burner. If improperly positioned, the clip will be trapped between the air/gas mixer tube and the range top which will affect the mixer tube alignment.
Do you have a instructions on replacing this on my stove top?
Answer Hello Don,
If you could please re-post with the model number for your unit, we can send you illustrated instructions on the removal of the top assembly. There are simply too many configurations to guess which you have. Thank you for your understanding in this matter.
Hello we have an oportunity to buy a ge spectra eterna xl44 for $80.00 the guy says it needs 2 ignitors im assuming its electrodes, do you have an how to install link to see if its worth the investment?
Answer Hello Tom, if you are looking for the burner electrodes you have located the correct part WB13K10003. To remove the electrode you will have to remove the burner head example WB16K10055. Once you have removed the head you will use a flat head screw driver to pry out the ignitor clip WB01K10112. The ignitor should slide up and out. Hope this helps!