Customer Questions and Answers for Water Valve by GE

Dan G for Model Number PFSS6PKWASS

Answer Dan, You're on the right track, The fill valve is the most likely issue, based on your post. If you have access to a multi meter, you can check voltage to the icemaker solenoid, from the icemaker to verify the icemaker control is working and the wiring is in tact. Thanks and Good Luck 

Linda D. for Model Number PFSF6PKXBBB - GE Refrigerator

Answer Hello Linda. The first thing I would suggest is to turn off the water to the water valve you just replaced. Remove the water supply line and put it in a bucket or a plastic trash can. Turn the water on and check to see that you have good water pressure to the valve. If there is good water pressure, since you said after you removed the filter you started getting some water, I would make sure the water reservoir WR17X12739 and connecting lines are not frozen. This unit has a reservoir heater that could have failed. If the lines are partially frozen the water pressure could be having to "bleed" past the restriction of ice blockage. Of course there is always the possibility of the new valve not opening completely. I certainly hope I've given you some information that will help you solve your problem!