Water is leaking from the icemaker into the ice bin and causing the cubes to freeze into a block of ice. Which part do I need to replace?
Frank for Model Number LSC26905TT
Answer Frank,
The icemaker would be the cause of the unit leaking water into the ice bin. The icemaker 5989JA1005D on the unit is warped and will need to be replaced.
My ice maker stopped filling the ice tray with water, the tube is not filled with ice and the rest of the unit seems fuctional. I ordered a whole new ice maker and replaced it, still no water filling, not sure what to do next, any ideas? I am mad at myself for spending $106.00 on a part I really didn't need, I have an extra one now I guess. Thanks in advance!
Jennifer for Model Number LSC26905TT
Answer Hello Jennifer,
You would want to check for power getting to the water valve when calling for water. You should receive 12 vdc to the water valve 5221JA2006D. If the water valve gets power but does not pump water then it is a bad valve. If the valve does not get voltage then it would more than likely be the control board since the icemaker has already been changed.
My ice tray is warped and I have ordered a replacement part. What is the best way to exchange it out ? Can it be done without removing the unit? IF not, what disassembly is required ? Thanks for any assistance.
Don for Model Number LG Refrigerator LSC27925ST
Answer Hello Don,
If you have the complete icemaker all you will need to do is to remove the ice bin, take out the phillips head screw that is holding the icemaker bracket in place and pull icemaker out. Once out disconnect the wire harness. Plug in new icemaker and reinstall.
I want to repair the ice maker because it is not making ice . Does ice maker assembly, part 5989JA1005D have the condenser unit, and it is all I require to repair the Ice maker?
Ken for Model Number Lsc26905tt
Answer Hello Ken,
The icemakers do not have a condensing unit on it. It uses air movement to freeze the ice and allow the thermistor to get cold enough to cycle. This icemaker 5989JA1005D would be the correct part to use if icemaker is not working.