I have power to dishwasher, but water not flowing and i'm getting
1E error. Can you help me please?
Answer Hello Mike. On the main board, there is a 4 pin connector with yellow, white, and grey wires. Place the meter probes on the yellow and white wires. If the reading is between 950 and 1300 ohms, replace the board. If it is not in those ranges, replace the valve. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html