How do I get the compressor fan motor assembly out of the back of refrigerator?
Answer Hello Brent,
The fan motor you were looking at is the evaporator fan motor inside the freezer compartment of the unit. If you pull the unit out away from the wall and remove the machine compartment cover, you will see the condenser fan motor. Simply remove the screws and remove the fan blade with it in place and the motor will come out easily. Since there is no model number listed, I cannot provide you with the correct part numbers for your unit.
How do I replace cooling fan for the refrigerator side of samsung rs263td refrigerator.
To replace the fan motor in the refrigerator compartment, you will need to remove the shelving. Once removed there should be a couple of screws holding the back panel on the wall. Remove the screws and then get ahold of the panel and pull it off. This will allow access to the fan motor to be replaced.
How do I replace evaporaor fan blade? It has a spring and plastic screw in front of it.
Answer Hello Kevin. There is no screw in it. You pull the old one off the shaft and then press the new blade onto the shaft of the unit.
My father refridge side by side, samsung: the middle wall is hot and the fan is not running , the refridge side is not cold. but the freezer is cold. Can you
tell me what is going on?
Answer Hello Tony. Test for power to the condenser fan motor. If there is power there, and the fan motor does not run, you will need to replace the condenser fan motor and make sure the coils under the unit are clean.
Does the da97-01948a fit the Samsung rs2530bwp?
Answer Hello David. Yes, based on the model number, DA97-01948A is the correct assembly for the unit.