24/7 Customer Support
For Viking Igniter (Part Number: AP5315579)
Roland for Model Number Dynasty RJGR3674A
Answer Hello Roland! The two igniters do not cross reference one another and can not be used in one anothers place. Sorry about that!
Was this helpful?
1 Answer
Joe F. for Model Number Viking 6 Burner Propane 36" Range
Answer Hello Joe. Test for 3.2-3.6 volts AC at the gas safety valve with the igniter turned on. If the voltage is there, you have a bad safety valve. If the voltage is low, you have a weak igniter and the igniter PB040001 will need to be replaced. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
J G for Model Number Viking 6 burner, 36" Gas range/oven
Answer Hello J G. Test for 3.2-3.6 volts AC at the gas safety valve with the igniter turned on. If the voltage is there, you have a bad safety valve. If the voltage is low, you have a weak igniter and the igniter will need to be replaced. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html