How to replace the main bearing.
Once you have the outer tub out and the inner tube removed from the outer tub you would have to tap the bearings out as they are pressed in. You will want to work the punch around the bearing as not to cause the opening to be come oblong.
How do i install the clutch part no. AP4310552 for the appliance model no. FAV6800AWW. Thank you.
Answer Rudy, here is the information from the manufacturer. Hope it helps, thanks! 1. Disconnect power supply to unit.
2. Lift Top Cover.
3. Remove Front Panel.
4. Loosen Drive Motor Tension Bolt.
5. Remove Drive Belt.
6. Remove Pulley Bolt.
7. Remove Pulley.
NOTE: When reinstalling, properly seat Pulley with a 1/16-1/8" gap between the Pulley face and shaft end. On reinstallation, tighten Pulley Bolt to 96 inch pounds.
I need a clutch assembly for serial number 151421416C.
Answer Paul, I believe your model should read FAV6800AWW. According to the model and serial number the replacement clutch is part number 25001169. Thanks!
Washes fine but will not spin. Error code uc.
Answer Hello Linda. Continuous Unbalanced Circuit.
Improper signal from Tub
Displacement Sensor. Check the shocks and the sensor int he unit.