My light bulb and light on the control box are not lit up everything else works except the lights. Check the bulb and it is not burned out also replaced door switch and that is not the problem. What else could it be?
Answer Hi Donna. It then has to be a open or bad wire connection. Check all pin connections to see if t is mis-plugged or burnt open. If it is burnt open then you will need to jump connections between the 2. The door switch wires can be jumped to see if it is a bad connection or bad switch. It may be the tight fold of the wires in behind the switch. Is the connections good at the board? Is the light socket getting 120vac? , and are the connections inside the socket burnt or not connecting the bulb? This part # is 4387478. Thank you.
What is the purpose of the beads fert in my whirlpool side by side?
Answer Hi Donna. The ferrite core are there to suppress and to "align" the electrical current so it , 1- does not interfere with other more sensitive Direct Current (dc) devices and set off false codes or interfere with "noise" @ surrounding appliances. They make your appliance most efficient electrically. The part # is 2308165. Thank you.