I have a Samsung dryer, front load, as I started to dry, there was nothing but a click sound and the drum would not turn when start button is pressed. The panel board lights up fine as if ready to go, could the belt cause this?
Answer Hello Jesse,
If the belt had come off you would be able to hear the motor running. Try opening the door and holding in the door switch when you hit the start button. Reach inside and try turning the drum by hand. If this starts the unit it most likely has a bad main drive motor DC31-00055D.
Where can I find samsung dryer belt for model#dv209aew/aa?
Answer Hello Victor. 6602-001655 is the belt for the model number you provided.
I am looking for a dryer belt.
Answer Curtis, the dryer belt is part number 6602-001655. Thanks!
Do you have a video on how to put on belt?
Answer Hello Terrance, we do not have a video for belt installation on this model at this time. Here is a link to our belt diagrams on the Repair Forum and it should help you with the routing. Thanks! http://forum.appliancepartspros.com/dryer-repair/25860-dryer-belt-diagrams.html
Is there a diagram for belt placement?
Answer Hello Theresa! This answer was located on our Repair Forum, this is a free service in which technicians will assist with answering repair questions for our customers. Please use this link to assist in your repair. Hope this helps!
Note: This question is for the older version of this part, but we thought you might still find it helpful
Do the grooves on the belt face the drum or face away from the drum?
Answer This answer was located on our Repair Forum, this is a free service in which technicians will assist with answering repair questions for our customers. Please use this link to assist in your repair.