I just found ball bearings and grease in the bottom of the tub, I can't find from where they are coming from?
Answer Hello Daniel. There is no parts in the model number you provided to cause this to happen. It may be that the parts came out of some pockets being washed in the unit.
During spin cycle tub shakes even when empty very bad with a load in. I've checked all suspension springs and the are intact and in good condition. Are there any other possible causes?
Answer Hello Ben,
There is a couple of things to check. First, you need to make sure the balance ring 387240 hasn't lost its' fluid. You see, it is filled with a saline solution to balance an out of balance load. If the liquid has leaked out, it will hop across the floor empty.
The next thing I would suspect is the skate plate 3946509. The skate plate has pads that the load rides on. In many cases where the unit has been sitting out of level for a long time, the pads on the skate plate will wear unevenly and cause the unit to act out of balance.
Will a bad cam bearing make the agitator slip while agitating?
Answer Hello Mac. No, if the agitator is slipping, you will need to replace the cam kit 285811. Hope this helps.
How many counter balance springs does the machine have?
Answer Hello Boomie! The counter balance spring 285901 comes in a kit of 3. Your appliance will only use one. You will need to follow the instructions that come with the kit to determine which spring to use on your product. Thanks!
Will the cam bearing make tub shake when spinning?
Answer Hello. No the cam bearing will not cause shaking while spinning. Most likely you have a broke suspension spring. 285901 Hope this helps.