Would like help on wire replacement on back of timer controller.
Answer Hello Dale. White goes to N, Broil is Blue, Black to L1, and Bake is Yellow.
Replaced oven temp sensor and oven won't hold temp and always low.
Answer Hello Fred. Make sure both the bake and the broil elements are good. If so, you will need to replace the electronic control board in the unit.
Range works but control timer wont come on.
Answer Hello Reggie,
If the control display will not come on then you would need to replace the Clock assembly WB27K5108. This part is showing as no longer produced by the manufacturer.
Is part number AP4009004 available in beige?
Answer Mark, the almond/beige clock assembly is no longer available and the manufacture only offers it in a black/white assembly as part number [AP4009004. Sorry about that!
What does F1 on display mean?
Answer Hello. Based on the fault code you provided, it sounds like the clock assembly 12001628. Hope this helps.
top stove work, but the oven is not working
Answer De, It could be a faulty clock, but you should start by checking to make sure you have 240 VAC at the elements in a bake or broil mode. It could be as simple as a damaged wire. You may want to remove the backpanel and check all the wires to the elements for damage first. Good Luck and Thanks,
If neither of the oven elements come on to bake, but is clicking like it's trying to, whats the problem?
Answer Hello Linda. Check and make sure you have 240 volts coming to the range. If so, check at the elements and see if your getting 240 to them. If there is only 120 volts to the elements, you can trace to the clock and see if your loosing voltage there. Hope this helps.