24/7 Customer Support

CHECKOUT
Items in Cart:
Total
$0.00

Customer Questions and Answers for Control Board by Whirlpool

  1. Our Price $389.51
    Compare At $463.52
    You Save $74.01
     Watch Video
    • Part Number: AP3176181
    • MFG Part Number: 9782455
    • Made by: Whirlpool
    Add to Cart

Questions & Answers

For Whirlpool Control Board (Part Number: AP3176181)

Ask a Question

Most Interesting  |  Latest Questions

I have a KitchenAid Superba range model KGRT607HBS9 (I think made by Whirlpool based on how the parts seem to turn up). Some water was spilled on the cooktop. No problem for a day. Then, there was an error. We unplugged it, waited one minute and turned back on. Now, the error is cleared and the display lights up "control lock" but it is completely unresponsive to input (holding down 3/control lock does nothing nor any other button or combo I can find to try). Looking at the circuit board under the controls, it looks like Q6 may have an issue as there is discoloration on the board on this spot. Do I need to replace the whole control board or is it possible that some other cheaper part or magic remedy might fix this thing? Thanks!

J.k. for Model Number KGRT607HBS9

Answer

Was this helpful?

1 Answer

I decided to replace the spark units (4) which required the removal of the 3 screws at the bottom of the display. This was straightforward. I did notice that there was a 2 wire connection (P11?) which had removed itself from the control board 9782455. I resoldered the connection back. I noticed that the wires to this connection were solid copper which led to undue torque on the pc board. I plugged the control board back in and reconnected the plastic ribbon connectors from the display panel. Got it all together including the three screws. Everything worked fine for 5 hours. Then the display panel went blank and I heard some tones then nothing. I removed the 3 screws again and then saw the display come alive again. This lasted 12 hours and then went blank again. The tones were heard and there was a symbol showing in the upper right corner which looked like the door lock symbol. It went out too. Should I remove and reinstall the module again or is there a symptom that is recognized here? Seems like a connector problem!

Brian B for Model Number YKGRT607HS9

Answer

Was this helpful?

1 Answer

Oven/stove works, readout/led doesn't, clock/temp readout worked for a day but not now, per diagram which panel 2 or 10 would likely be the cause. Am I headed in correct direction?

Glenn for Model Number KERC607HBS8

Answer

Was this helpful?

1 Answer

I have a kitchen aid range that is having issues with control/display board.m#KESC308LSS0. The display does not work unless i apply pressure to the 12 pin wiring harness plug p11. Also when i get display to work it shows that the temperature probe is plugged in when it is not. All other functions work on the stove. I have seen on other websites they offer the display board and the electronic control board separately. Looks like you guys offer only the two combined. My question is do you sell them separately and if so which one would you think i need. Thanks in advance.

Johnny for Model Number KESC308LSS0

Answer

Was this helpful?

1 Answer

Hi, Our whirlpool cooktop works fine, however our oven is completely non-responsive or functional. When pressing the control buttons for the oven, it does not respond at all: no sounds, no display, no heat, no oven light. I'm not sure if it's the keypad or the control board 9782455 or both. Any suggestions on how to determine the exact problem or how to proceed? Thank you in advance for your expertise Arnold K

Arnold for Model Number 9752834A

Answer

Was this helpful?

1 Answer

We have a KitchenAid Range, model KESC307HBS8, that after the self cleaning cycle nothing worked except for the fan which runs constantly. It had one open thermal link and I replaced it with no improvement. Whats your opinion?

Rick

Answer

Was this helpful?

1 Answer

I have a Kitchenaid Superba gas range with convection oven. Over the past few months when the range or stove got heated up the lights on the display would flicker then go out. This makes the stove shut off and all the controls (electric display ) do not work till things cool down. This happens now after 10-15 mins. ?? Do you think?

Mr. B for Model Number ykgsc308ls0

Answer

Was this helpful?

1 Answer

Our range behaves oddly when we try to use the oven. Sometimes, you can turn the oven on, but it turns itself off minutes later. Sometimes, the touchpad seems to not work-- you can press buttons, but they don't register. It's erratic. We've tried two parts so far to fix the problem, but neither has worked. The parts that have NOT worked include the console (part 9782419CB) and the power board (9782437). I am not sure what the problem is and welcome input. My own uneducated guess is that maybe it is the control board (part 9782455) or something in the wiring? 1. I'd welcome your views about what part may be the problem-- either of the above, or something else? 2. If something in the wiring, is this something that a regular homeowner could address, or are we now in the stage where a visit from an appliance repair specialist is likely required? Thank you.

Alix for Model Number KESC307HBS8

Answer

Was this helpful?

1 Answer

The control panel lights of our kitchenaid gas range were intermittently going on and off. sometimes when the oven is on and other times not. Recently they have been off for a few days and then came back on when the oven was warm. When the oven was turned off, they went out again. The oven touch controls work since we are able to turn the oven on, use the timer and other features. Wondering if the thermal fuse could be the cause or the more expensive control board or microprocessor.

Shawn for Model Number kgrt607hbs9

Answer

Was this helpful?

1 Answer

We have a malfunctioning range-- particularly when the oven temperature is hot, the buttons on the console start to behave erratically-- the press buttons don't work, basically. We had purchased this part: AP3174907 We managed to install it, but it didn't actually solve the problem. So now I'm not sure where the issue lies - any suggestions?

Alix for Model Number KESC307HBS8

Answer

Was this helpful?

1 Answer

 

 
 
We are Safe, Secure, Dependable and Trusted
  • BizRate.com Customer Certified Site - Click to Verify