24/7 Customer Support

CHECKOUT
Items in Cart:
Total
$0.00

Customer Questions and Answers for Control Panel Assy W/membrane, Switch (white) by Whirlpool

  1. Our Price $180.64
    Compare At $213.16
    You Save $32.52
     
    • Part Number: AP3043892
    • MFG Part Number: 8300441
    • Made by: Whirlpool
    Add to Cart

Questions & Answers

For Whirlpool Control Panel Assy W/membrane, Switch (white) (Part Number: AP3043892)

Ask a Question

Most Interesting  |  Latest Questions

The control panel starting going dark and then back on again. It beeped and The oven was still working doing this but now the control panel is completely dark and the oven does not work. I tried resetting it by turning the breaker on and off but no changes. The oven light still works but I can't get the oven to turn on or get the control panel display to work. I'm confused as to which part to replace on some of the other postings. Thank you for your help. Tim

Tim for Model Number GBD307PDQ09

Answer

Was this helpful?

1 Answer

I replaced control board on oven when the clock went out. When I installed the control board and reattached the panel I get no error codes on the panel but the on and off buttons do not work. Is this an problem with the control board or the key panel? Any suggestions?

JAW3D for Model Number GBD307PDT7

Answer

Was this helpful?

1 Answer

Front control panel went haywire for several days, beeping and showing code E6F2. Tried turning off power for several minutes. For a week I could coax the oven into working. Then that stopped working. I removed the screws and tried gently pushing the connectors into the control board, just to make sure they were all the way in. Now the display is blank and doesn't beep when I push the buttons. I'm going to check the control fuse tonight and revisit the connections to the board but I suspect the board is toast. It's the one part you do not seem to be able to get here.

Joe T for Model Number Amana GBD307PDQ7

Answer

Was this helpful?

1 Answer

My display screen has gone black but beeps if you press the buttons and the internal oven light still works. If you flip the breaker it will sometimes come back on and work fine for up to 2 or 3 hours and will then just go blank again. One of the existing questions covered this exact topic however the expert answer given was: "You will need to check the thermal fuse AP4057518 going to the control panel. It should read closed for continuity. If it is open, you will need to replace it. It is mounted in the black wire next to the control board. Hope this helps." The problem is the AP4057518 takes me to a dryer maintenance kit. Example when you click the given link: Dryer Prev Maint Ki Part Number: AP4057518 Made by Frigidaire I am a novice and this has me confused. Why does the answer take me from a double oven problem to a dryer maint kit? Thanks for the help.

Dean C. for Model Number GBD307PDT09

Answer

Was this helpful?

1 Answer

The control display panel went blank, displays nothing. The buttons beep if pushed but nothing happens. Oven does not heat, internal oven light works. I checked the circuit breaker, it was OK, but reset in anyway. What's up?

Rich for Model Number GBD307PDQ7 Whirlpool double oven

Answer

Was this helpful?

1 Answer

Just had control panel rebuilt installed it. Some of the buttons on keypad do not work. Then the code f2 e1 appears. Is the key pad bad for sure? Checked voltage on connectors, all is good. Keypad connector seems to be firm.

Steve for Model Number gbd307pdq09

Answer

Was this helpful?

1 Answer

The self-cleaning cycle completed in the upper oven. The oven cooled down and beeped that it was ready to use. Then went black. No power. The circuit breaker was not tripped. However, I turned breaker off and on but still have no power to either oven.

Jim K for Model Number GBD307PDT6

Answer

Was this helpful?

1 Answer

OK are there directions for removing the inner door panel? Thanks

Bruce for Model Number same

Answer

Was this helpful?

1 Answer

Instructions for removing the touch pad?

Bruce G. for Model Number same

Answer

Was this helpful?

1 Answer

Actually the correct model number is above. The replacement control assy. id AP30431916. Now is this both keypad and board? Where do I fine instructions on first checking what is wrong with the codes E6 and F2 and how to access the panel to check and clean the power connection? Then determine which part is defective etc.

Bruce G. for Model Number RBD245PDQ12

Answer

Was this helpful?

1 Answer

 

 
 
We are Safe, Secure, Dependable and Trusted
  • BizRate.com Customer Certified Site - Click to Verify