Two or one to a pkg when shipped?
Answer Hello Jane! The water deflector 99001885 comes one per package. Thanks!
1 person found this answer helpful.
Hi! I get a small spot of water(about the size of a quater) directly under the left hand side corner of the door on my Maytag MDB2400AWE. The door gasket seems ok. I'm wondering if it could be the water deflector shown near the bottom of the door gasket
Answer Jim, Yes, a missing or broken tub deflector 99001885 could cause a minor leak from the corners of the door. You may also want to check and adjust the door latch assembly 903098 tighter. Check to insure the dishwasher hasn't shifted inside the cabinet and is level in both directions.
Water is coming out at right side of the bottom of door ,does my model have one or two of those water defiectors an could the seal around the door be leaking ?
Answer Hello Rick,
There should be a deflector on either side of door. If not you will want to install deflector. Also check spray arms for cracks. Cracked or broken spray arm wil cause the unit to leak due to spraying into bottom of tub and creating a rippling effect.
I have a leak coming from the door after removing door panel I see nothing obvious is there a part or parts I can start with to trouble shoot this problem ?
Answer Hello John,
If the unit is leaking from the bottom of the door there is a good change that the issue is either a stopped up hole in a spray arm, a spray arm that is separating where it is "melted" together at the factory, or an over soap situation. These are the most common causes of water leaks in the field. Check it out and let us know if we can provide further assistance.
Are we supposed to have 2 of these parts to put on or one? Please advise asap.
Answer Hello Lisa! Yes, there are two water deflectors 99001885 used on your model MDC4100AWX. Thanks!
Is there any way in adding an additional deflector to the portion of my order that has yet to ship due to back order? I found the picture misleading in regard to parts as to the amt included. Can the shipping be waived due to part description not clear?
Answer Hello Jane! If the part has backordered and no other parts have been ordered it may be possible to cancel the original order and create a new one. Please contact our customer service at 1-877-477-7278 option 2 for further assistance in doing so. Thanks!