24/7 Customer Support

CHECKOUT
Items in Cart:
Total
$0.00

Customer Questions and Answers for Dispenser Assembly by Whirlpool

  1. Our Price $85.43
    Compare At $101.66
    You Save $16.23
     
    • Part Number: AP3861933
    • MFG Part Number: 8182704
    • Made by: Whirlpool
    Add to Cart

Questions & Answers

For Whirlpool Dispenser Assembly (Part Number: AP3861933)

Ask a Question

Most Interesting  |  Latest Questions

At times there is water still left in the washer after the load is completed. What causes this and why is this happening?

Sara for Model Number GHW9100LW1

Answer

Was this helpful?

1 Answer

Can a bad dispenser assembly cause the nf code to appear only before rinse cycle?I have replaced both of the inlet valves and the problem is the same those were the pats suggested for the nf code apearing

Mark for Model Number wf328aaw/xaa

Answer

Was this helpful?

1 Answer

On control panel the control lock lamp is lit ,unable to get washer to work. tryied unpluging it for 2 mins,tried pressing cancel button ,cleaned filter basket .

William L for Model Number ghw9150pwo

Answer

Was this helpful?

1 Answer

I replaced the bellow because it was leaking at the bottom. After putting the washer back together, I started the washer back again. While it starts filling the drum, water is running from the front to the back on top of the dispenser. Not sure how this is happening or how to stop it.

Brad B for Model Number ghw9150pw0

Answer

Was this helpful?

1 Answer

My Whirlpool washer dispenses the softener too early. I find that water overflows/splashes/leaks into the softener container while the washer is filling water into the detergent containers. The actuator arm moves correctly from positions 1 to 4 at the correct times during the cycle. I either have in internal leak or a blockage from years of use, right? Do I replace the Dispenser Assembly (8182704) or the Dispenser Actuator (8181723) ?

Quant for Model Number GHW9200

Answer

Was this helpful?

1 Answer

Altho part# AP3128798 says it is the detergent container, it actually houses the area where you put the softener and bleach.... I am having problems getting my 'detergent' (BOTH liquid and powder) to wash out of the dispenser on the 'other' side... ALL of the parts in this 'drawer' assy have been cleaned and flushed out. I can actually 'manually' flush out the detergent each wash cycle is I choose to (I would rather not). Is there some place 'above' the drawer assy where the water flows thru before it gets to the 'detergent' side of the drawer that could be the problem?? Sorry for the confusion... Thanks for your help!!

Newnanny for Model Number GHW9200LQ

Answer

Was this helpful?

1 Answer

Does this part include the top with all the holes in it where the water flows thru to dispense the detergent/softener/bleach?? I have 2 of these washers and BOTH of them I am having a problem getting the water to flush out my detergent (both liq and powder)... no problem with softener or bleach... thought maybe the holes might be limed up since we have hard water. Any suggestions??

Newnanny for Model Number GHW9200LQ

Answer

Was this helpful?

1 Answer

Does the dispenser assembly (AP3861933) come with the spring loaded actuator on top?

Mark

Answer

Was this helpful?

1 Answer

There are 2 plastic nipples on the back of the dispenser. Mine only has a hose on the top nipple. There is water leaking from the bottom nipple. Should there be a hose hooked up to the bottom nipple?

Steve

Answer

Was this helpful?

1 Answer

Which cycles do the 4 numbers on top of the Dispenser assembly represent? My washer started in off on 1 then immediately went to 2, stayed on 2 when rinse started, back momentarily to 1, then back to 3, then finally to 4. I was reading one of the above answers that said 1 is soap, 2 is bleach, 3 is softener, and 4 is flush. My softener did not release until the needle was on 4. Is that correct for this machine? The clothes do not seem to have the smell nor softness of the fabric softener on them when done. Thank you.

Greg for Model Number Whirlpool GHW9200L

Answer

Was this helpful?

1 Answer

 

 
 
We are Safe, Secure, Dependable and Trusted
  • BizRate.com Customer Certified Site - Click to Verify