Does this part come with screws? If not, which screws do I need to order?
Answer Hi, the screws are not included with the baffle. For the screw you will have to order 33002973 two for each baffle. You can install them by removing the top of the dryer and manually turning the drum clockwise. Thanks!
2 people found this answer helpful.
Can you replace the baffle's by just removing the front casing?
Answer Hello Ron. You will need to remove the front, and raise the top of the dryer, to replace the baffles. Hope this helps.
1 person found this answer helpful.
What's the difference (other than size) between the short baffle and the tall baffle? Do the tall ones provide better tumbling but break off quicker with heavy loads? Not sure which I should order to replace the ones in the dryer. Thanks!
Answer Ed, the only difference is the size in them. The manufacturer has difference sizes in the dryer for better "tumbling" action. It is suggested to replace the broken part with the correct replacement. Your model uses two tall baffles 33002032 and two short baffles 33001755. Thanks!
What is average life expectancy of a dryer baffle
from normal wear/use?
Answer Hello Patti. Honestly there is no way to answer this. I have seen baffles last as long as the dryers.
Washer fills okay for wash cycle, but does not fill enough for the rinse cycle.
Answer Hello Mike. This is the way the machine is designed with the two pressure switches. It is made to have a low fill on the rinse cycle. There is nothing you can do to change it. Sorry.
What are the measurements between the tall and the short? Thank you.
Answer Scott, the tall baffle 33002032 is approx. 4" tall and the short baffle 33001755 is approx. 3" tall. Thanks!
I have lost 2 baffles in my dryer. I have ordered replacement and the screws. What is the correct way to install?? I would prefer to do this DYI. All advise would be much appreciated.
Answer Hello Pat,
To replace the baffles on dryer you will lift the top and with door open put the baffle in place and screw in. To lift top you will use a flat blade between the main top and front panel. There will be a clip on either side that you will depress to lift top.
How do I get into the dryer to install a dryer baffle. (front, back, top, ect..)?
Answer Hello Schmidt. We will need your model number to help you with this. Please post your model number with a new question on the parts page. http://www.appliancepartspros.com/modelnumber_locator.aspx
Hi, I need 2 baffles for my dryer. What are the part numbers for the baffles and the screws please?
Answer Hello Dominic, you have 2 different baffles in the dryer drum. Part# 33002032 for the Tall Baffle and part# 33001755 for the Short Baffle and I show the same screw 33002973 used for both. Thanks!