I need a new lint filter. Do you have one that will fit?
Answer Charles, the replacement lint filter is part number 33001808. Thanks!
Will this lint screen fit my Cabrio dryer?
Yes, the lint filter W10120998 is the correct lint filter for your unit.
Need a replacement lint filter. Can you help me?
The dryer lint filter for your unit is part number 33002970.
Need the felt seal for lint screen PN: W10049370.
Answer Terry, the manufacturer does not offer the felt separate from the filter W10120998. Thanks.
Trying to replace lint filter on dryer. The one shown doesn't look like mine.
Answer Hello Sylvia! The replacement lint filter used on your model WED9500TW1 is part number W10120998. This is a manufacturer replacement part and may differ in appearance but is a functional equivalent to the original. Thanks!
Dryer will not heat. Have replaced high temperature thermostat, heating coil, and thermal fuse. Dryer will still not heat. Have checked breakers in breaker panel and all are good. I have checked voltage with multimeter and is all good. Any help would be greatly appreciated.
Answer Hello Rick,
There are only six components in the heating circuit. The heating element, high limit thermostat, operating thermostat, thermal cutoff, timer, and centrifugal switch. Since you have replaced the high limit thermostat, heating element, and thermal fuse, it's a safe bet that these are not the issue. The next step is to test the remaining components to determine the component at fault. Testing the operating thermostat is the same as testing the high limit thermostat and the thermal fuse. If they are good, you will read a connection with zero resistance. If they are bad, you will read nothing. The timer and centrifugal switch are a bit more complicated to test. The timer will have to be set to a cycle that calls for heat and you have to test from terminal C to terminal A. This is the contacts that pass L1 through the timer to the heating circuit. If it reads open, the timer W10185988 will require replacement. If it and the operating thermostat 3387134 are good, replace the motor 279827 since the centrifugal switch is made in the motor and cannot be replaced alone.