The dyer is heating fine, when i turn the knob to set a time, the knob does not move but the clothes continue to dry. Is this a problem with the knob or do i need to replace the timer.
Answer Hello Cheryl, if you are able to turn the timer knob and hear the timer clicking as it moves from one cycle to the other than you can rule the knob out. If the knob was broken it wouldn't move the timer from one cycle to the next. If it never moves off of one of the minute marks that you set it at, my guess is you have a bad timer. Part # WE4X797.
I bought the replacement timer knob part # 688865 but this timer knob has a smaller stem in outside diameter and the inside is smaller like for a smaller shaft. I located the metal sleeve on the old one and even if I were able to remove the sleeve in the new one it would still be to small. Can you help?
Answer Hello Frank! The dryer timer knob, 688865, is the correct replacement for your model 11086180100 according to the manufacturer. If you were needing the push to start knob you will need part number 349796. Make sure that none of the knob has broken off on the timer shaft causing it to not be able to install on the shaft. Hope this helps, thanks!
Can I order a new dryer knob for the timer for this machine? Thank you!
Answer Hello NJN! The replacement timer knob used on your dryer model FSG447GHS0 is part number 131873500. Thanks!
Which dryer knob will work with my dryer above?
Answer Hello Tracy! The dryer knob insert is part number 22001664. The dryer knob is part number 22001659. The dryer knob skirt is part number 33001621. You will need all three parts to complete a fully assembled dryer timer knob. Thanks!
Looking for a replacment knob for very old Sears Kenmore Heavy Duty dryer. Any suggestions??
Answer Mare, We've made several attempts to cross reference a part number for a timer knob, for you. We can't The partial model number you supplied won't work, in the Whirlpool or Sears / Kenmore Parts information, Sorry. You may want to order and try the part number you posted, but no guarantee it would fit or work. Thanks and Good Luck
The timer knob has broken. Do you have a replacement for it?
Answer Hello Caryl. No, the knob 345340 has been permanently discontinued by the manufacturer and we don't know of any source or replacement for the part. Thanks.